**NCA** 5x112 PCD JBW Foosh Alloy Wheel (4.5x15) in Gloss Black

The Foosh alloy wheel from JBW wheels is based on the looks of the Porsche Fuch wheel originally fitted to the 911 model.  It is available in 2 different stud patterns and 4 different finishes.  Available as a 4.5 inch or 5.5 inch wide with a 15 inch diameter or 7 inch wide with a 17 inch diameter. 

• The 5×112 PCD in 15 inch diameter has an offset of ET20.
• The 5×112 PCD in 17 inch diameter has an offset of ET40.
• The 5×130 PCD in 15 inch diameter has an offset of ET45.
• The 5×130 PCD in 17 inch diameter has an offset of ET40.

Each style of wheel is available in Black, Matt Black, Chrome or Polished finishes.

Techincal

What is PCD?

PCD stands for Pitch Circle Diamter and is a measure of the wheel stud/bolt hole locations.  The PCD is a circle with its centre at the centre of the face of the wheel.  The centres of the mounting holes are equally spaced around this circle.  So for example a 4x130mm PCD means four mounting holes, equally spaced around a 130mm diamter circle from the centre of the wheel.

Orignal PCD measurements:

• Pre 1967 Beetle (wide 5) = 5×205 PCD
• 1968 Onwards Beetle (4 stud) = 4×130 PCD
• Splitscreen Bus (wide 5) = 5x205PCD
• Baywindow Bus 1968 to 1970 (wide 5) = 5×205 PCD
• Baywindow Bus 1971 to 1979 (Small 5) = 5×112 PCD
• Type 25 Buses 1979 to 1992 (Small 5) = 5×112 PCD
• Porsche Hubs (5 Stud) = 5×130 PCD

NOTE: Karmann Ghia`s and Type 3 Variants use the same stud patterns as the VW Beetle.

What is the offset of a wheel?

The offset is the distance from the mounting face of the wheel (where it mounts against the wheel hub), and the centreline of the wheel`s width.  It will be expressed as a distance, usually in mm and called ET.