Pertronix Billet Distributor With Ignitor 1 Bundle Kit - Black Cap, Chrome Coil With Black Leads

Pertronix Flamethrower 1 coil in chrome for 12 Volt vehicles.

Flamethrower 1 coils are an uprated 40,000 volt, perfect for use with Pertronix electronic ignition and Pertronix Flamethrower HT Leads, but can be used with standard points and condenser and standard 7mm HT leads.

It`s higher voltage allows for larger spark plug gaps for added power, smoother response and better fuel economy.

Quality: Top quality Pertronix

Product Features:

• 3.0 Ohm primary resistance
• 9.0 Ohm secondary resistance
• 80:110.0mH primary inductance
• Oil filled
• Internally resisted

Bundle Kit Available: We also sell Flamethrower bundle kits which consist of a Flamethrower coil, Flamethrower HT leads and Pertronix electronic igntion, please see the associated products.

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Type 25 or T3: 1979 – 1983

VW Karmann Ghia: 1960 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

Billet distributor fitted with an Ignitor 1 electronic ignition module and a black cap.

Plug `n` Play, simply install the distributor in the engine, connect two wires and start up.

Designed for maximum ignition performance, replace your outdated points or electronic distributor with this performance proven system, provides huge improvements over points distributors and offers long term trouble free operations.

FEATURES

• Precision CNC machined 6061-T6 billet aluminium housing is lightweight yet strong.
• Each billet distributor is hand polished and buffed to a high luster.
• Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
• Upper ball bearing and oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanical stability reducing high RPM vibration.
• 20CR Steel Gear Heat treated to surface hardness of 45C Rockwell.
• Precision stamped and balanced mechanical advance weights eliminate erratic timing.
• Adjustable mechanical advance with proprietary limiting function permits multiple settings.  Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
• Premium high dielectric strength cap and rotor manufactured using PBT polymer and brass terminals.

For even more performance, consider adding a compatible Flamethrower coil and a set of Flamethrower HT Leads for increased spark energy and higher RPM potential.

Quality: Top quality

Measurements:

• Width of distributor once installed – 117mm
• Height of distributor once installed – 140mm

Fitment: Not suitable for Type 4 engines

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

Pertronix Flamethrower 8mm HT Lead set in Black for Type 1 aircooled 1200cc – 1600cc engines.

Often the cause of poor ignition is when your High Tension Leads or HT Leads as they are more commonly known are breaking down and need replacing.

Most modern electronic ignition systems require suppression style wires to preserve sensitive components.  Flamethrower 8mm HT Leads provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug.

HT Leads have a thick outer insulation around a central conductor core.  This thick insulation prevents arcing from the cable to any earthed engine component.  The central core is normally manufactured from copper.

RFI (Radio Frequency Interference) is naturally produced by the spark being radiated by the wires which may cause malfunctions in your electrical equipment.

Various manufactures have come up with various solutions to this problem by suppressing this.

In a nutshell the more electrical equipment you have in your car the better the quality of HT lead you will need.

If you are running electronic ignition then it is vital that you use a good quality set of leads so as not to effect the running of your car.

Product Features:

• Two current paths for reliability and redundancy.  The primary path is a carbon impregnated fibreglass centre core and the secondary path is a stainless steel alloy.
• Low 500 ohm per foot resistance
• 8mm Silicone jacket to resist high temeratures, moisture, oil and chemicals
• EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks
• Fibreglass reinforcing braid for added stregth and flexibility

Quality: Top quality Pertronix

Quantity: Please Note: These are supplied with an extra long unfinished coil lead designed for performance engines that may have the coil fitted in a non standard location. Requires finishing and crimping before installation.

Fitting: Sold as a set of 5 leads which connect all the spark plugs to the distributor and then a shorter lead which connects the distributor to the ignition coil.

Fitment: These 8mm Flamethrower HT Leads replace the original leads fitted to all 1200cc, 1300cc, 1500cc and 1600cc Type 1 aircooled engines.

Bundle Kit: Also available are the electronic ignition bundle kits, which contain Flamethrower coil, Flamethrower HT Leads and Pertronix Ignitor electronic igntion, see associated products.

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979