200mm Lightened Flywheel Kit (8 Dowel)

Replacement German Elring or DPH rear main oil seal for all 1200cc to 1600cc engines from 1960 to 1979.

Quality: German quality

Quantity: Sold each, 1 required per engine

Fitting: We recommend changing the flywheel o ring when replacing the main oil seal. See part number 311105283A

Please note seal may be black or orange, depending on the supplier, both are of equal quality.

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

Crankshaft dowel pin, standard size, that goes between the end of the crankshaft and the flywheel for all Type 1 engines from February 1966 and on.

Quality: Geunine Volkswagen

Quantity: Sold each, 4 required on a standard engine

Size: 8mm x 19.5mm

Bundle Kits: We also sell these as a set of 8 for performance engines in high tensile and oversize, see part numbers AC1054033 and AC1058140

Applications:

VW Beetle: 1966 – 1979

VW Splitscreen Van: 1966 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1966 – 1974

VW Type 3: 1966 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1966 – 1979

Replacement rubber seal that sits inside the groove of all 1200cc to 1600cc Type 1 aircooled flywheels

Quality: Good quality, top quality version also available, see part number 311105283ATQ

Quantity: Sold each, 1 required per engine 

Fitting: When changing your crankshaft main oil seal it is always worth replacing this seal at the same time

Applications:

VW Beetle: 1966 – 1979

VW Splitscreen Van: 1966 – 1967

VW Baywindow Van: 1968 – 1979

VW Type 25 or T3: 1979 – 1983

VW Karmann Ghia: 1966 – 1974

VW Type 3: 1966 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1966 – 1979

Don`t take a chance on stock gland nuts in high performance applications, this ultra strong 4130 chromoly is what you need. 

This heavy duty 36mm crankshaft gland nut and washer holds the flywheel onto the crankshaft to fit all standard and performance 1200cc – 1600cc Type 1 aircooled engines and CT code engines fitted to T3 or Type 25 vans

Quality: Top quality reproduction

Fitting: Fitted with special pre-greased needle bearing and grease seal.

Fitment: Compatible with stock 4 dowel pin and 8 dowel pin flywheels.

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Type 25 or T3: 1979 – 1983

VW Karmann Ghia: 1960 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

6kg lightened 8 dowel, 200mm, flywheel for 12 volt Type 1 aircooled engines from 1300cc – 1600cc from 1968 on, manufactured to exacting specifications from high grade steel and balanced.

Lightened flywheels are designed to help engines rev faster, increasing acceleration

Quality: Top quality

Fitment:

• 200mm
• 12 Volt
• 130 teeth
• 8 dowel
• O-Ring Style

Applications:

VW Beetle: 1968 – 1979

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1968 – 1974

VW Type 3: 1968 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1968 – 1979

8 dowel gasket that installs between the flywheel and the crankshaft on all VW aircooled 1200cc – 1600cc engines

Original VW gaskets have 4 holes, these 8 hole gaskets are designed for performance crankshafts and flywheels that use 8 dowel pins, but can be used on standard 4 dowel flywheels

Quality: Good quality 

Quantity: Sold each

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1955 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1949 – 1979