Type 25 Front Bumper Bundle Kit - Black

Washer 8.4x16x1.6
Washer pushrod tube guard to head water boxer – T25
Washer front to rear hose brackets – T25 8/85>
Washer water pump pulley – T25 >7/85
Washer elbow clamps waterboxer – T25 >7/85
Washer exhaust to head waterboxer – T25 all years
Washer silencer clamp to down pipe diesel CS/KY – T25 >89
Washer silencer mounts diesel – T25
Washer steering column to couplings – T25
Washer clamp front gear shift rod to universal joint – T25 83>
Washer front & rear bumper mount centre section – T25
Washer body end of gas strut – T25
Washer upper roller sliding door – T25 85>
Washer fuel tank strap – Mk1 Golf
Washer small bumper iron rear to body cabrio clipper – Golf Cabrio 88>
Washer for cylinder block/ toothed belt guard 2.4/2.5 – T4
Washer for accelerator pedal and clutch assy – T1 Beetle
Washer for top header catch – T1 Cabriolet
Washer used in exhaust assemble for diesel engines – Mk2 Golf/Jetta

Replacement steel bumper finished in black primer for the front of all Type 25 models from 1979 to 1992.

Please note that due to the length of this product an extra £5.00 will be charged if you would like it delivered.

Applications

VW Type 25 Bus Front Bumper

Type 25 bumper end cap for all models from 1979 to 1992.

This cap fits the front bumper on the left hand side and the rear bumper on the right hand side.

Type 25 bumper end cap for all models from 1979 to 1992.

This cap fits the front bumper on the right hand side and the rear bumper on the left hand side.

This fitting kit allows you to attach 1 bumper end cap onto a Type 25 Bumper.

Kit includes:

• 1 coach bolt with washer and nut
• 1 plastic clip
• 1 black plastic cap
• long self tapping screw or bolt.

Enhance and protect your beloved Volkswagen Baywindow or T3 bus with our top-quality Black Bumper Bolt Cap, specifically designed to fit all Baywindow buses from August 1972 until the end of production, and all Type 25 or T3 buses from 1979 to 1992. Crafted as a faithful reproduction of the original part, this bumper bolt cap is an essential addition to your restoration project or regular maintenance routine.

Top Quality Reproduction:

Our Black Bumper Bolt Cap is a premium-grade reproduction, ensuring that it meets the highest standards of durability and aesthetics. Manufactured from robust materials, it not only provides a snug and secure fit but also maintains its appearance over time, resisting wear and tear from environmental exposure.

Easy Installation:

For a perfect fit, we recommend softening the bumper bolt cap in hot water before installation. This process allows the cap to expand slightly, making it easier to position over the bolt head. As the cap cools down, it contracts around the bolt, ensuring a tight grip that prevents splitting and keeps the cap securely in place. This simple preparation step guarantees a hassle-free installation and long-lasting performance.

Perfect Fit for Classic VW Models:

• Volkswagen Baywindow Van (1973 – 1979): Whether you`re restoring a vintage Baywindow bus or performing routine maintenance, our bumper bolt cap offers an authentic look and feel, maintaining the classic aesthetic of your vehicle.
• Volkswagen Type 25 or T3 (1979 – 1992): This bumper bolt cap is also a perfect match for all Type 25 or T3 buses, providing a seamless fit and a durable finish that complements the rugged design of these iconic models.

Sold Individually:

Each Black Bumper Bolt Cap is sold individually, allowing you to purchase the exact quantity you need for your project. Whether you`re replacing a single worn-out cap or refreshing the entire set, you can order with confidence, knowing that each piece meets the same high standards of quality and fit.

Why Choose Our Bumper Bolt Cap?

• Authentic Reproduction: Faithful to the original design, maintaining the classic look of your VW bus.
• High Durability: Made from top-quality materials to withstand the elements and keep your vehicle looking its best.
• Easy Installation: Soften in hot water before installation for a secure fit that won’t split or come loose.

Preserve the integrity and appearance of your classic Volkswagen Baywindow or T3 bus with our Black Bumper Bolt Cap. It`s the perfect finishing touch for any restoration project or routine maintenance, ensuring your vehicle remains as iconic as the day it rolled off the assembly line.

8mm Bolt – 16mm Long, 13mm Head, 1.25mm Thread Pitch

This high-quality 8mm bolt is 16mm long, featuring a 13mm head and a 1.25mm thread pitch. With a tensile strength of 8.8, this bolt is designed for various critical applications across multiple classic Volkswagen models. It is a fully threaded bolt (set screw), ensuring a secure and reliable connection in your vehicle`s assembly.

High-Quality Construction:

Manufactured to meet OEM specifications, this bolt is built for durability and reliability, making it an essential component for maintaining the structural integrity and functionality of your Volkswagen.

Product Details:

• Material: High-strength steel
• Length: 16mm
• Head Size: 13mm
• Thread Pitch: 1.25mm
• Tensile Strength: 8.8
• Quantity: Sold individually

Applications:

This versatile bolt is used in various applications across different Volkswagen models, including:

• Volkswagen Beetle:
  • 200mm, 210mm, and 228mm clutch to flywheel bolt
  • Steering column clamp bolt (including 1302 models)
• Volkswagen Baywindow (1968 – 1979):
  • Clutch to flywheel bolt (1.7-2.0L engines, 200mm, 210mm, 228mm)
  • New bumper irons to rear bumpers with plate fixings (1968 – 1972 & retro)
  • Front bumper to deformation panel bolt (1973 – 1979)
  • Under floor plate bolt
• Volkswagen Splitscreen (Up to 1967):
  • Clutch to flywheel bolt (8mm)
• Volkswagen Type 25 or T3 (1979 – 1992):
  • Waterboxer pushrod tube guard bolt
  • Rear of cross pipe bracket bolt (1985 – 1992)
  • Anti-roll bar bracket front suspension bolt
  • Gear shift shaft flange supporting front bush bolt (1983 – 1992)
  • Front & rear bumper mount center section bolt
  • Cab door hinge to body bolt
  • Center hinge to sliding door bolt (1979 – 1984)
  • Carrier arm to front edge sliding door & lower roller mounting bolt
• Porsche 911:
  • Anti-roll bar bolt
• Porsche 924:
  • Battery cable bolt

Why Choose Our 8mm Bolt?

• Precision Fit: Engineered to match OEM specifications for a perfect fit and secure installation.
• Durable and Reliable: Made from high-strength steel, ensuring long-lasting performance in demanding applications.
• Versatile Application: Suitable for a wide range of classic Volkswagen and Porsche models, making it an essential part for maintenance and restoration.

Whether you`re working on a restoration project or simply performing routine maintenance, this 8mm bolt is a critical component to ensure the secure assembly and reliable performance of your vehicle.