Splitscreen Bus Master Cylinder with Reservoir LHD - 1967 ONLY Dual Circuit

Dual circuit master cylinder brake fluid reservoir for use on all 1966 to 1967 Splitscreen buses fitted with a dual circuit master cylinder

Please Note: Depending on supplier this part may be slightly different than shown, but will be of equal quality

Quality: Top Quality reproduction   

Fitment: 1966 – 1967 Only Splitscreen Bus 

Fitting: Supplied with cap, but no master cylinder plugs or grommets, if required see part number 211611817A 

Measurements: 85mm between outlets

Applications:

VW Splitscreen Van: 1966 – 1967 Only

Replacement dual circuit master cylinder for use on all left and right hand drive 1967 ONLY Splitscreen buses

Supplied without brake light switch

Fitting: Not supplied with reservoir grommets, please see part number 211611817A

Tips: If you are changing you master cylinder, some or all of the brake pipes may need to be re-routed. This is due to the port layout being different on the new master cylinder. When planning your brake line routing, be sure to fit the brake switch `below` the master cylinder centre line. Otherwise air can be trapped in the system which will make it difficult to bleed the brakes.

It is also VERY important that the end play of the brake pedal pushrod is adjusted correctly. Follow the factory specifications of 1mm endplay. The pushrod can be adjusted using the thread and lock-nut on the pushrod shaft. For some applications you may have to cut the pushrod down in length.

Measurements: 22mm piston

Applications:

VW Splitscreen Bus: 1967 ONLY