1302 + 1303 Beetle Master Cylinder - RHD - Dual Circuit

Replacement dual circuit master cylinder for use on all right hand drive 1302 and 1303 Beetles

Quality: Good quality

Fitting: Right Hand Drive Only, these will not LHD models as the fitting holes are offset unlike standard Beetle master cylinders

Tips: If you are changing you master cylinder, some or all of the brake pipes may need to be re-routed. This is due to the port layout being different on the new master cylinder. When planning your brake line routing, be sure to fit the brake switch `below` the master cylinder centre line. Otherwise air can be trapped in the system which will make it difficult to bleed the brakes.

It is also VERY important that the end play of the brake pedal pushrod is adjusted correctly. Follow the factory specifications of 1mm endplay. The pushrod can be adjusted using the thread and lock-nut on the pushrod shaft. For some applications you may have to cut the pushrod down in length.

Measurements: Uses 357611817 master cylinder plug and 113611153C master cylinder plastic pipe

Applications:

VW Beetle: 1971 – 1979

VW Buggy + Baja: 1971 – 1979