Sedan Beetle Door Seal Bundle Kit - 1966-79 (All Seals For Both Doors)

This reproduction-quality left-hand door seal is designed to fit VW Beetles built from 1967 to 1979, excluding Cabriolet (convertible) models. Engineered to match the original profile and length, this rubber seal fits snugly into the channel running around the perimeter of the passenger-side door frame, forming a tight seal against water, wind, and road noise.

Over time, original door seals often become cracked, brittle, or compressed, leading to poor sealing and uncomfortable drafts or leaks. This replacement restores a snug fit, helping to maintain a quieter cabin, better temperature control, and protection from the elements.

The seal should be installed into the factory channel in the doorframe and secured using a quality contact adhesive for best results. Trimming may be required for a perfect fit depending on body condition or previous modifications.

Specifications:

• Side: Left (Passenger’s side on RHD vehicles)

• Material: Reproduction rubber

• Fitment: Fits into door perimeter channel

• Adhesive Required: Yes (contact adhesive recommended)

• Excludes: Cabriolet/Convertible Beetles

Vehicle Compatibility:

• VW Beetle (Saloon/Standard): 1967–1979
  (Not suitable for Cabriolet models)

Fitting Notes:
Ensure the seal is cleanly seated in the perimeter channel with even tension. Use contact adhesive sparingly to avoid excess squeeze-out. For best results, install on a clean, dry surface and allow adequate cure time before closing the door.

This reproduction right-hand door seal is a direct replacement for VW Beetles manufactured between 1967 and 1979, excluding Cabriolet (convertible) models. Designed to fit snugly into the channel around the drivers-side door frame, this seal helps block out wind noise, water, and dust while restoring the comfort and weatherproofing of your classic Beetle.

Made from high-quality reproduction rubber, the seal matches the original design for an accurate fit and function. Over the years, door seals can wear down, crack, or become misshapen, leading to drafts and leaks—this replacement ensures your door closes firmly with a proper seal.

Installation is straightforward: the seal fits into the perimeter channel of the door and should be secured using contact adhesive for best results. Be sure to test door closure and adjust fitment as needed once installed.

Specifications:

• Side: Right (Drivers side on RHD vehicles)

• Material: Reproduction rubber

• Fitment: Installs into the factory channel around the door perimeter

• Adhesive Required: Yes (contact adhesive recommended)

• Excludes: Cabriolet/Convertible Beetles

Vehicle Compatibility:

• VW Beetle (Saloon/Standard): 1967–1979
  (Not compatible with Cabriolet models)

Fitting Notes:
Ensure the surface is clean and dry before installation. Apply adhesive in small sections and seat the seal evenly into the channel. Allow sufficient curing time before using the door to ensure long-lasting adhesion.

This gasket for the small end of the exterior door handle is a vital sealing component used on several classic VW models to prevent water ingress and ensure a snug, vibration-free fit. Located at the tip of the door handle where it mounts to the door skin, this gasket helps protect the paintwork and keeps moisture from creeping behind the handle — a common area for corrosion on older vehicles.

Specifically designed for use on all VW Beetles from 1968–1979, including Mexican Beetles, Type 3 models from 1968–1973, and Karmann Ghias from 1968–1974, this reproduction part is moulded to original specifications for a correct and clean fit.

Ideal for restorations or replacements during repainting, it ensures your handle sits flush against the body as originally intended.

Note: This is the smaller of the two gaskets used per handle. If you`re replacing both, we recommend ordering the full seal kit (part number: 111837211KIT) which includes all four gaskets for a pair of handles.

Applications:

• VW Beetle: 1968–1979, including Mexican Beetles

• VW Type 3: 1968–1973

• VW Karmann Ghia: 1968–1974

Specifications:

• Material: High-quality rubber reproduction

• Fitment: Small end of exterior door handle

• Quantity: Sold individually

• Bundle Available: See part number 111837211KIT for full handle seal sets

Gasket for the large end of the door handle on all Beetles from 1968 – 1979, Mexican beetles and Type 3 door handles 1968 – 1973

Quality: Reproduction

Quantity: Sold each

Bundle Kit Available: We also set a set of door handle seals for two handles, part number 111837211KIT

Applications:

VW Beetle: 1968 – 1979

VW Type 3: 1968 – 1973

Replacement German Quality Rubber Seal for Check Rod – For Beetles & Baywindow Buses

This high-quality rubber seal is designed to fit the check rod on all VW Beetles from 1961 onwards and all Baywindow Buses. Crafted with precision in Germany, this durable rubber seal ensures a snug fit, preventing water ingress and minimizing wear over time. Ideal for restoring your vehicle`s door functionality to its original condition, this part is essential for maintaining a smooth door operation and sealing.

• Quality: German-manufactured rubber, made to last.
• Applications: Fits all VW Beetles (1961 onwards) and Baywindow Buses.
• Quantity: Sold separately.

Replace worn or missing seals to prevent further damage and keep your vehicle`s doors functioning properly.

Replacement Metal Clip for Felt Channel on VW Beetles, Type 3 Variants, and Baywindow Buses

Ensure a secure and lasting fit for your Volkswagen`s door felt channels with our high-quality Replacement Metal Clips. Specifically designed for the large felt channels on the doors of sedan Beetles, Type 3 Variants, and the cab doors of Baywindow Buses, these clips play a critical role in maintaining a snug fit and smooth operation of your vehicle`s windows.

Quality Construction:

Crafted from durable metal, these clips are designed to securely hold the felt channel in place, preventing it from shifting or loosening over time. The clips feature serrated teeth that grip the felt channel firmly, ensuring a reliable and long-lasting fit.

Fitment Information:

These clips are installed in the top and rear part of the door. It`s recommended to fit these clips to each door before installing your new felt channels. Each clip has a `tang` that helps secure it in place. Once the clips are in position, simply push the felt channel into the clips, where the serrated teeth will hold it securely.

• Quantity: Typically, 6 clips per door are required to ensure a secure fit.
• Safety Note: These clips are very sharp, so handle with care during installation to avoid injury.

Applications:

These metal clips are suitable for a variety of classic Volkswagen models, making them an essential part for restoration and maintenance projects:

• Volkswagen Beetle (1949 – 1979): Ideal for securing felt channels in sedan doors.
• Volkswagen Baywindow Van (1968 – 1979): Used in the cab doors to hold felt channels securely in place.
• Volkswagen Type 3 (1961 – 1973): Perfect for Type 3 Variants, ensuring smooth window operation.
• Volkswagen Buggy + Baja (1949 – 1979): Suitable for various Buggy and Baja models using similar door configurations.

Why Choose Our Replacement Metal Clips?

• High Durability: Made from strong, high-quality metal for a reliable and secure fit.
• Exact Fit: Specifically designed to match original specifications, ensuring perfect compatibility with your VW`s felt channels.
• Essential for Restoration: Critical for maintaining the proper function and appearance of your vehicle`s doors.

Maintain the integrity and functionality of your VW`s door felt channels with our Replacement Metal Clips. These clips ensure that your felt channels remain securely in place, providing smooth window operation and a clean, professional finish.

These felt channels fit along the top edge and rear upright recess in the doors of VW beetles 1952 to 1979, Bay window buses from 1968 and Type 3`s 1962 to 1974.

They help to seal and guide the wind up window in place and are fitted using clips, clip part number 111837361.

Fit the clips to the door frame recess first then push the felt channels into the clips.

Inner scraper for the left hand side door of all Sedan (NOT CABRIOLET) Beetles from 1966 to 1979 + Mexican beetles.

These inner scrapers fit on the inside of the door with 4 clips that are attached and `scrape` against the window when winding up and down.

Inner scrapers for cabriolet/convertible are also available from us.

Inner scraper for the right hand side door of all Sedan (NOT CABRIOLET) Beetles from 1966 to 1979 + Mexican beetles.

These inner scrapers fit on the inside of the door with 4 clips that are attached and `scrape` against the window when winding up and down.

Inner scrapers for cabriolet/convertible are also available from us.

Front quarter light rubber seal for the left hand side of all Sedan (NOT CABRIOLET) Beetles from 1965 to 1979 + Mexican beetles.

This is the seal that is `C` shaped when fitted to the door.

We do also sell these seals for the Cabriolet/Convertible models if required. 

Quality: Reproduction

Quantity: Sold each, per side 

Fitment: Left

Applications:

VW Beetle: 1965 – 1979

Front quarter light rubber seal for the right hand side of all Sedan (NOT CABRIOLET) Beetles from 1965 to 1979 + Mexican beetles.

This is the seal that is `C` shaped when fitted to the door.

We do also sell these seals for the Cabriolet/Convertible models if required. 

Quality: Good quality

Quantity: Sold each, per side 

Fitment: Right

Applications:

VW Beetle: 1965 – 1979

This top-quality left outer window scraper with chrome aluminium trim is the perfect replacement for worn or faded original scrapers on Volkswagen Beetles manufactured from 1965 to 1979. Designed for the passenger’s side (left-hand side), this scraper restores both functionality and the classic look of your Beetle’s door trim.

Fitted to the outside of the door, the scraper maintains a tight seal against the window glass, helping to wipe away moisture and debris as the window moves up or down. The integrated chrome aluminium trim mirrors the original finish found on many classic Beetles, providing a fresh, polished appearance to the window frame.

Crafted from premium materials for long-lasting durability and UV resistance, this outer scraper is essential when refurbishing doors, replacing window regulators, or completing a full restoration. It fits snugly into the factory channels for a straightforward installation.

Sold individually. For a full outer scraper set, pair it with the matching right-side scraper.

Applications:

• VW Beetle: 1965–1979

Restore your VW Beetle’s clean lines and weather protection with this top-quality right outer window scraper, complete with chrome aluminium trim. Designed specifically to fit Beetles manufactured from 1965 to 1979, this scraper ensures a perfect factory-style appearance while helping to keep moisture, dirt, and debris out of the door internals.

This scraper fits to the outside of the driver`s-side door (right-hand side) and sits flush against the glass, wiping it clean as the window is raised or lowered. The integrated polished chrome aluminium trim adds a bright, classic touch that complements the original chrome window surrounds.

Made from premium-grade materials for durability and flexibility, this scraper resists cracking and shrinkage over time, making it ideal for restorations or everyday use. A must-have when replacing door glass or refurbishing your Beetle’s window mechanisms.

Sold individually. For a complete outer scraper set, order the matching left-side scraper as well.

Applications:

• VW Beetle: 1965–1979

Small verticle felt channel that sits in the quarter light divider bar and guides and seals the window glass when winding the window up or down

Sold each these fit all beetles (sedan and convertible) made from 1965, Baywindow buses from 1968 on and Type 3 1965-74 

Quality: Good quality 

Quantity: Sold each

Fitting: Vertical felt on the back of the quarterlight

Applications:

VW Beetle: 1965 – 1979

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1965 – 1974

VW Type 3: 1965 – 1973

Front quarter light flap seal for VW beetles, bay window camper vans and Type 3`s

These seals fit in the upright divider bar between the opening quarter light and drop glass and seal the quarter light glass when in the closed position.

One required per quarter light window.

Replacement Interior Light Switch Seal for A Post

Restore the functionality and look of your classic Volkswagen with this replacement interior light switch seal. Located on the A Post, this seal ensures a tight and secure fit for the interior light switch, preventing moisture and dust from entering the switch assembly.

Versatile Fitment:

This high-quality reproduction seal is designed to fit seamlessly on the A Post of various classic Volkswagen models. Whether you`re replacing a worn-out seal or upgrading your restoration project, this part is essential for maintaining the integrity of your vehicle`s interior.

Durable Construction:

Made from durable materials, this seal is engineered to withstand the rigors of daily use. It offers a reliable barrier against environmental factors that could affect the performance of your interior light switch.

Easy Installation:

This seal is designed for straightforward installation on either the left or right hand A Post, ensuring a snug fit that helps to extend the life of your interior light switch.

Applications:

This interior light switch seal is suitable for the following Volkswagen models:

• Volkswagen Beetle: 1960 – 1979
• Volkswagen Karmann Ghia: 1960 – 1974
• Volkswagen Baywindow Bus: 1968 – 1979

Additional Parts:

For a complete restoration, consider replacing the interior light switch itself. Compatible switches are available under part number 113947561H.

Why Choose This Seal?

• Exact Fit: Designed specifically for classic VW models, ensuring perfect fitment on the A Post.
• Protection: Helps prevent moisture and dust from affecting the interior light switch.
• High-Quality Reproduction: Crafted to match the original specifications for reliable performance.

Maintain the authenticity and functionality of your classic Volkswagen with this replacement interior light switch seal. It`s the perfect solution for restoring the original appearance and ensuring the longevity of your interior light switch.