Early 180mm Clutch Kit - Pre 1970 Models - With Heavy Duty Clips

This aircooled engine clutch pressure plate is the earlier style of pressure plate that was fitted onto engines with 180mm flywheels that has a centre ring

This style uses the release bearing that has seperate clips on each side that are not joined to the release bearing. 

Quality:Reproduction

Applications:

VW Beetle: 1949 – 1970

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1970

VW Karmann Ghia: 1955 – 1970

VW Type 3: 1961 – 1970

VW Trekker: 1968 – 1970

VW Buggy + Baja: 1949 – 1970

Replacement 180mm clutch disc used in all years of aircooled engines with 180mm flywheels including 6 volt and 12 volt models. 

Quality: Good quality

Fitting: Clutch release bearings and pressure plates also available as well as complete 3 piece kits

Measurements: 180mm

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1965

VW Karmann Ghia: 1955 – 1974

VW Type 3: 1961 – 1964

VW Buggy + Baja: 1949 – 1979

Clutch release bearing originally fitted to all pre 1970 models with either 180mm or 200mm flywheels including 6V models

It is retained onto the clutch cross shaft with 2 clips that fit each side of the release bearing (sold separately)

Quality: Good quality

Fitting: Not supplied with clips

• Standard clips, see part number 111141177A, sold each
• Heavy duty clips see part number AC1411208, sold as a pair

 Applications:

VW Beetle: 1949 – 1970

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1970

VW Karmann Ghia: 1955 – 1970

VW Type 3: 1961 – 1970

VW Trekker: 1968 – 1970

VW Buggy + Baja: 1949 – 1970

Heavy Duty early clutch release bearings that retain the release bearing onto the clutch cross shaft
 

Quality: Good quality 

Quantity: Sold in pairs  

Fitment: Pre 1970 clutch release bearings

Applications:

VW Beetle: 1949 – 1970

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1970

VW Karmann Ghia: 1955 – 1970

VW Type 3: 1961 – 1970

VW Trekker: 1968 – 1970

VW Buggy + Baja: 1949 – 1970