Trekker Spring Plates

These spring plates can be mounted onto all Splitscreen Buses from march 1955 to the end of production in July 1967 with the original gearbox fitted with reduction boxes. Please note if you have a Swing Axle or IRS conversion then you will require different spring plates.

These adjustable spring plates can be mounted onto all Type 181 and 182 Trekker models with IRS rear suspension. Sold in...

These adjustable spring plates can be mounted onto all Type 181 and 182 Trekker models with IRS rear suspension. Sold in...

These adjustable spring plates can be mounted onto all Splitscreen Buses from march 1955 to the end of production in...

Spring plate retainers set that prevent the spring plates from excessive movement on hard launch or off roading. Welding required.

Axle spacer set, T1 IRS, 6 pieces (complete)

Spacer, outer, IRS rear axle

Bolt for seal flange/bearing retainer

Replacement bolt used for mounting the torsion bar cover plate to the chassis on all 1302 and 1303 IRS Beetles

M14 Nut for securing the spring plate to the hub on the rear of a T2. Note: Six needed per vehicle.