Beetle Master Cylinder Brake Switches and Boots

Master cylinder rubber plug with a 7mm hole for the brake reservoir feed and an outer diameter of 17mm which fits into the master cylinder.

For use on the following models:

VW Beetles from 1968 to 1971 with dual circuit brakes

Splitscreen Buses in 1967 only with dual circuit brakes

Baywindow Buses that have servo assisted brakes.

Mk 1 Golf`s inlcuding Hatchback and Cabriolet models.

This rubber bung is used on all Beetle master cylinders from August 1971 onwards and all VW Baywindow vans from...

This boot fits on the end of the master cylinder, stopping any dirt and grit from getting in and wrecking the seals, pistons and internals for use on all Beetles, Karmann Ghia, Type 3 and Splitscreen Bus

Gasket between master & servo. For use on all Volkswagen Baywindow Buses with Brake servos fitted. Sold Separately

This metal plug can be used to block off any threaded holes in your master cylinder that are not required for your application.

T1 Master Cylinder Bolt

Circlip, brake pushrod

This M10 stainless steel bolt can be used for various applications to seal threaded holes on brake master cylinders or...

Copper washer that can be used for various applications to seal any correct size bolt or screw.  Quality: Top Quality  Quantity: Sold Separately ...